[spacer image]
Products Home
Wireless Sensors OEM Wireless Sensors Wi-Fi Sensors
[spacer image]
Wireless Gateways
[spacer image]
Wireless Control
[spacer image]
Range Extenders
[spacer image]
OEM Magnetic Presence Sensor Icon
OEM Wireless Sensors

OEM Wireless Magnetic Presence Sensor

The OEM Magnetic Presence Sensor can be used to detect the presence of a magnetic source. Place a magnet strip on a motor or machinery to measure movement and placement.

All sensor data is securely transmitted through an OEM wireless gateway to the iMonnit Online Sensor Monitoring software where it is stored and viewable from any web enabled device. The iMonnit online software system is completely white label (private brand) capable, allowing you to offer the online monitoring service as your own. Email and SMS text messages can be configured through the online system to alert users immediately when a defined parameter has been met or exceeded.

« Learn more about OEM online monitoring software

Product Features:

  • 900, 868 and 433MHz operating frequencies
  • 250 - 300 ft. non-line-of-sight device range*
  • Replaceable 3.0V battery
  • At 1 hour heartbeat setting, coin
    cell battery will last ~ 1-2 Years. **
  • Includes Magnet and Mounting Hardware.
     
  • Sense presence and movement.
  • Tell if a door has been opened or closed.
  • Check door status on a timed basis.

* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting
    frequency and other variables.

 
Buy Wireless Magnetic Sensors
 

OEM Wireless Magnetic Presence Sensor - Technical Specifications
 
Documentation
 
OEM Wireless Magnetic Presence Sensor Data Sheet OEM Wireless Magnetic Presence Sensor Data Sheet
 
 
RF Board Specifications
Available Operating Frequencies 900 MHz (25 Channels)
868 MHz (5 Channels)
433 MHz (15 Channels)
Device Transmission Range 300 - 500 ft. Non-LOS
Approximate Battery Life 300,000 Transmissions
(~ 2-5 Years Depending on Settings*)
Supply Voltage 2.0 - 3.6 VDC **
Current Consumption 0.7 μA (sleep mode)
2 mA (radio idle/off mode)
2 mA (measurement mode)
25 mA (radio RX mode)
35 mA (radio TX mode)
Electronics Operating Temperature Range -40°C to +85°C ( -40°F to +185°F ) ***
Performance 0.7% BFSL Accuracy
Certifications 900 MHz product; FCC and IC Certified.
Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-RFSC1)
Complies with Industry Canada standards. (IC: 9794A-RFSC1)

868 and 433 MHz product; CE Certified.
Complies with CISPR 22:2008-09 / EN 55022:2010 - Class B and ETSI EN 300 220-2 V2.4.1 (2012-05).

Magnetic Sensor Specifications  
Power Dissipation 536 mW
Operate Point South: max 5 mT, North: - 5 mT
Release Point South: 0.6 mT, North: -0.6 mT
Period Max 100 mS
Supply Current 8.0 µA typ, 12.0 µA max
(Vdd = 1.80 V, Ta = 25 C)  
   
Absolute Maximum Ratings (Ta = 25 C)  
Power Supply Voltage [-0.1 - 4.5 V]
Output Current ± 0.5 mA
Operating Temperature -40°C to 85°C
Storage Temperature -40° to +125°C

* Battery life depends on sensor reporting frequency and other variables.
** Hardware can not withstand negative voltage. Please take care when connecting power.
*** At temperatures above 100°C, programmed memory in electronics can be lost.