[spacer image]
Products Home
Wireless Sensors OEM Wireless Sensors Wi-Fi Sensors
[spacer image]
Wireless Gateways
[spacer image]
Wireless Control
[spacer image]
Range Extenders
[spacer image]
OEM Pulse Counter Icon
OEM Wireless Sensors

OEM Wireless Pulse Counter

The OEM wireless multi input pulse counter can be integrated with up to four separate dry contact or mechanical switch and closure devices to count the number of actuations occuring within a given time frame. Available in a single-input or multi-input (4 simultaneous inputs) versions.

All sensor data is securely transmitted through an OEM wireless gateway to the iMonnit Online Sensor Monitoring software where it is stored and viewable from any web enabled device. The iMonnit online software system is completely white label (private brand) capable, allowing you to offer the online monitoring service as your own. Email and SMS text messages can be configured through the online system to alert users immediately when a defined parameter has been met or exceeded.

« Learn more about OEM online monitoring software

Product Features:

  • 900, 868 and 433MHz operating frequencies
  • 250 - 300 ft. non-line-of-sight device range*
  • Robust sensor housing.
  • 2 replaceable AA 1.5V batteries.
  • At 1 hour heartbeat setting, included AA
    batteries will last more than 4 Years. **

    •  
  • Counts number of pulses in given time frame.
    (Counter does not aggregate pulses, but resets to
    zero, reporting each pulse as an individual event.)
  • Support up to four seperate inputs.
  • Product comes with standard 36in wires.

* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting
    frequency and other variables.

 
Buy Wireless Single Input Pulse Counters


Buy Wireless Multi Input Pulse Counters
 

OEM Wireless Pulse Counter - Technical Specifications
 
Documentation
 
OEM Wireless Pulse Counter Data Sheet OEM Wireless Pulse Counter Data Sheet
 
 
RF Board Specifications
Available Operating Frequencies 900 MHz (25 Channels)
868 MHz (5 Channels)
433 MHz (15 Channels)
Device Transmission Range 300 - 500 ft. Non-LOS
Approximate Battery Life 300,000 Transmissions
(~ 2-5 Years Depending on Settings*)
Supply Voltage 2.0 - 3.6 VDC **
Current Consumption 0.7 μA (sleep mode)
2 mA (radio idle/off mode)
2 mA (measurement mode)
25 mA (radio RX mode)
35 mA (radio TX mode)
Electronics Operating Temperature Range -40°C to +85°C ( -40°F to +185°F ) ***
Performance 0.7% BFSL Accuracy
Certifications 900 MHz product; FCC and IC Certified.
Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-RFSC1)
Complies with Industry Canada standards. (IC: 9794A-RFSC1)

868 and 433 MHz product; CE Certified.
Complies with CISPR 22:2008-09 / EN 55022:2010 - Class B and ETSI EN 300 220-2 V2.4.1 (2012-05).

Pulse Counter Specifications Single Input Multi Input
Number of Inputs / Counters 1 4
Counter Bit Depth  16 bit 16 bit
Detection Wires  1High Impedance (2-Wire) High Impedance (5-Wire)
Counter Operation  Positive and / or Negative Edge Pulses
Transition Counting Every Level Transition
(High to Low)
(Low to High)		 Does Not Count Transitions
Compatibility  Open Collector NPN Switches Mechanical Switches
Transactions per Counter Input  65,000 Max / Heartbeat (Transmission)
Max Input Pulse Rate  20 Hz (20 / second) (4 or less / second recommended) *
Lead Wire Length 3 ft. ( 36 in.)
* High pulse count rates can severely impact battery life.

* Battery life depends on sensor reporting frequency and other variables.
** Hardware can not withstand negative voltage. Please take care when connecting power.
*** At temperatures above 100°C, programmed memory in electronics can be lost.